| items | Technical parameters |
| Model | TPS220M-FC30 | TPS330M-FC30 |
| Cable length | 220M | 330M |
| Environmental temperature | -20~45ºC(working),-40~65ºC(storage) |
| Relative humidity | 10~80%RH(working),5~90%RH(storage) |
| Altitude | ≤3000m |
| Ground power module | Input voltage | 380±10%VAC,three-phase, five-wire system (TCM),frequency 50Hz |
| Output voltage | 600~800Vdcadjustable,Factory Default 800Vdc |
| Output power | ≥22000W(Rated Long-Time Output),≥25000W(peak value≮30s) |
| take-up and payoff speed | 0~3m/s,adjustable |
| take-up and payoff tensile | 0~20N,adjustable |
| interface | Input air plug, bollard output LP20 air plug, fiber optic FC port (optional) |
| Button and switch | AC Switches, high voltage on/off buttons, cable take-up buttons, power backup switches |
| Protection level | IPx4 |
| Size | 600×570×460±0.5mm,excluding foot pads and external accessories |
| Weight | 54±0.5kg,excluding tethered cable |
| Tethered cable | Material | Alloy lightweight high temperature resistant aircraft wire, composite fluoroplastic insulation, high modulus tensile aerospace grade fiber braid |
| Fiber optic communication | The tethered cable is an optoelectronic composite cable containing tightly wrapped single-mode fiber with optional fiber optic communication. |
| Current | 25~30A |
| DC resistance | 1.6±0.1Ω,100m@20ºCloop |
| Resistance Tensile strength | ≥300kg,resistant to repeated reaction and release times≥1000 |
| Insulation strength | ≥3500Vdc,1min no breakdown |
| Cable length | standard equipment 220m,optional 330m |
| Outer diameter | 6.3±0.1mm |
| Weight | 44±1g/m |
| Air module | Input voltage | 580~810Vdc wide range input |
| Output voltage | 59Vdc±1%,constant voltage output,support voltage customization |
| Output power | ≥18000W(rated long-term output),≥22000W(peak value≮10s) |
| Protection function | Input over voltage,under voltage protection,output over voltage,over current,short circuit,and over temperature protection |
| Communication function | Optional CAN communication to report voltage, current, temperature data and operating status information. |
| Isolation voltage | ≥3000V(Vin-Vout),1min,Current leakage 5mA,no breakdown,flying arc and corona phenomena |
| Installation method | Replacement of one drone battery, direct plug-and-play installation |
| Heat dissipation | Built-in fan for active cooling, reserved air ducts for forced air cooling |
| Interface | Input LP20 air plug,output XT90,XT60×2 |
| Protection level | IP54 |
| Size | 468×308×142±0.5mm,excluding connector |
| Weight | 10.8±0.2kg(Replacement of one 11.5kg drone battery) |
| Packages | Size | wheeled suitcase:850×740×600±5mm(Wheels not included) |
| Weight | 115±5kg,Storage of ground power module, air module, trailer (optional), Annexes and documents |
